We can order in any item not on our website … Just contact us.
TAMIYA 1/10 THUNDER DRAGON (2021) SPEC EDITION, KIT, PAINTED BODY, 47458A, HC_OZ
or 6 weekly interest-free payments from $41.50 with
Only 1 left in stock
TAMIYA 1/10 THUNDER DRAGON (2021) SPEC EDITION, KIT, 47458A
|Thunder & Flame
This assembly kit creates an updated re-release version of the classic R/C off-road buggy Thunder Dragon, which appeared in a Japanese cartoon in the 1980s. Its ABS bathtub frame is tough and allows easy maintenance, while 4-wheel double wishbone suspension uses CVA oil dampers and a front stabilizer for a superior ride. Sealed gearboxes front and rear contain differentials with die-cast 3-bevel types for smooth, superior handling feel, and semi-pneumatic spike tires give great grip. The streamlined body is molded in polycarbonate, with non-canopy sections painted in silver. It is pre-cut for convenience.
|Tough Shaft-Driven 4WD
The midship motor, shaft-driven 4WD chassis is based around a lightweight and tough monocoque, with 4-wheel independent double wishbone suspension attached to gearboxes: an easy maintenance layout using upper "I" and lower "H" arms. Dual CVA oil dampers at the rear and a single one in the front monoshock setup are joined by a front stabilizer for optimal flex. Gear differential units front and rear are in sealed gearboxes, and an aluminum motor mount further improves reliability.
★Length: 390mm, Width: 240mm, Height: 139mm ★Wheelbase: 260mm ★Minimum ground clearance: 23mm ★Tread: 203mm (front), 194mm (rear) ★Bathtub frame ★Tire width/diameter: 38/83mm (front and rear) ★Shaft-driven 4WD ★3-bevel differential gears (front and rear) ★3-piece steering tie-rod ★4-wheel independent double wishbone suspension ★Gear ratio = 7.68:1 ★Type 540 Motor ★Electronic Speed Controller (ESC) NOT included.
|Separately Required Items
★2-channel R/C system and Steering Servo, ★AA Batteries for Transmitter ★ 7.2v nimh or 7.4v lipo Charger ★ ESC required
|Dimensions||50 × 35 × 13 cm|